0
SKU: M3-LPC1768H

LPC1768 HEADER BOARD

Product, Cortex M3 Based LPC1768 Header Board.

$0.03

Description

LPC1768H is a Header Board designed for CORTEX M3 Based Microcontroller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

FEATURES

  1. Controller: CORTEX M3 Based LPC1768 from NXP.
  2. Package: LQFP100.
  3. Clock Used: 12MHz for Controller, 32.768KHz for internal RTC.
  4. Power: On Board, 5V and 3.3V.
  5. On Board reset and ISP switches.
  6. JTAG Connectivity Option.
  7. Test LED via IO Pin.
  8. On Board USB Device.
  9. Can be USB or external Powered.
  10. Board Specifications:Dimensions:

      • Dimensions: 90 x 56 mm.
      • No of Layers: 2
      • FR4, Blue Solder Mask, ENIG, 1.6mm thickness.

JTAG Options for Debug/Programming:

Parallel Port JTAG (tested on Keil uvision4.53 IDERowley Crossworks)

CoiNel ARM USB JTAG (tested on Rowley CrossWorks)

CoiNel CoLinkEx (tested on Keil)

The Board can also be used with other compatible JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download section.

ISP Programming:

Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic.

Programming Using CoFlash

The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. You can download the tool in the download section.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx.

USB Boot Loader

The Board can also be programmed via USB Secondary Bootloader. Check LPC1768 USB Boot Loader document for more details.

TOOLS:

Our products can be used with majority of IDE and plugins that support Cortex M3 family. A few IDE and plugin details are given below.

  • Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  • Rowley Crossworks (30 day evaluation version can be used.)
  • IAR workbench (32K code limited version could be used.)
  • CooCox CoIDE (Unlimited, Open Source)

Plugins/Programmers:

H-JTAGCooCox ColinkFlash Magic have been tested.

Compatible debuggers like U-Link, J-Link etc can also be used.

Kit Deliverables:

  1. LPC1768 Header Board
  2. Jumper Wire
  3. USB Cable

Downloads

DOWLOADABLE DETAILS

SAMPLE CODES
SL NO  DESCRIPTION FORMAT  
1 SAMPLE LED TEST PDF Download

Reviews

There are no reviews yet.

Be the first to review “LPC1768 HEADER BOARD”

Your email address will not be published. Required fields are marked *

Download CAN Breakout Board Details

Download

MCP2551 CAN Transceiver 5V Supply DB9 and screw terminal connection 120R terminating resistor via jumper

Select your currency
USD United States (US) dollar